50
MAINTENANCE
Element4 Gas Fireplaces
European
Home
.com
REMOVING AND CLEANING THE GLASS
Step 1.
Remove all of the trim pieces from the fireplace. The location and
quantity of trim varies with model but in every case there is no top
trim. The trim pieces are held firmly in place with magnets and will
simply lift out. The bottom (horizontal) trim pieces are at the lower
edge of the glass panels and the side (vertical pieces) are where the
glass meets the wall.
Step 2.
Gasketed glass clamps hold the edges of the glass panel in place.
The quantity and location of the clamps vary by model. Remove the
retaining bolt(s) holding the glass clamp and then remove the clamp.
Remove all of the retaining bolts and clamps holding in the first piece
of glass.
REMOVING THE GLASS
• No. 2 Phillips screwdriver (not included)
• Gloves (not included)
• Suction Cup
TOOLS REQUIRED
The glass panels on this fireplace are held in place by a number of
retaining bolts and gasketed clamps. These instructions will show you
how to remove and install the clamps and glass panels.
Please read these instructions completely before proceeding and visit
our website or QR code below for more information.
OVERVIEW
ENSURE THE GLASS IS NOT HOT!
Except for tunnel, the first glass panel to be removed is the one which
is not touching a gasketed edge. This panel is marked in the photo
to the right.
BEFORE YOU BEGIN
Side Trim
Bottom Trim
Two-bolt
Glass Clamp
Retaining Bolt
To see how to remove the glass from an Element4 fireplace
please visit the link below.
WWW.EUROPEANHOME.COM/RESOURCES/VIDEOS/
