47
OPERATING the FIREPLACE
Element4 Gas Fireplaces
European
Home
.com
PROGRAM MODE
1 2
ON
AM
PM
OFF
ON:
Press
button. , or ,
or
displayed.
1 2
ON
AM
PM
OFF
OFF:
1.
Press
or or button to enter
Manual Mode.
2.
Press
button to enter Thermostatic
Mode.
NOTE:
The set temperature for Thermostatic Mode is the temperature
for the on time in Program Mode. Changing the Thermostatic
Mode set temperature also changes the on time temperature
in Program Mode.
Default settings:
ON TIME (Thermostatic) TEMPERATURE: 21 °C (70 °F)
OFF TIME TEMPERATURE: “
” (pilot flame only)
1 2
ON
AM
PM
OFF
TEMPERATURE SETTING:
1.
Press
button and hold until
flashes.
and set temperature (setting
in Thermostatic Mode) displayed.
2. To continue press button or wait. ,
displayed, temperature flashes.
3. Select off temperature by pressing the
or button.
4. To confirm press button.
NOTE:
The on (Thermostatic) and off set temperatures are the same
for each day.
1 2
ON
AM
PM
OFF
DAY SETTING:
5.
flashes. Press or button to
choose between
,
, , , , , , , .
6. To confirm press button.
MODES of OPERATION
1 2
ON
AM
PM
OFF
Thermostatic Mode
The room temperature is measured and
compared to the set temperature. The flame
height is then automatically adjusted to
achieve the set temperature.
1 2
ON
AM
PM
OFF
Program Mode
PROGRAMS 1 and 2, each can be
programmed to go on and off at specific
times at a set temperature.
AM
Eco Mode
Flame height modulates between high and
low. If the room temperature is lower than
the set temperature, the flame height stays
on high for a longer period of time. If the
room temperature is higher than the set
temperature, the flame height stays on low
for a longer period of time. One cycle lasts
approximately 20 minutes.
THERMOSTATIC MODE
1 2
ON
AM
PM
OFF
ON:
Press
button. displayed, preset
temperature displayed briefly, and then room
temperature displayed.
OFF:
1. Press
button.
2. Press
or button to enter Manual
Mode.
3. Press button to enter Program Mode.
4. Press
button to enter Eco Mode.
1 2
ON
AM
PM
OFF
SETTING:
1.
Press
button and hold until
displayed, temperature flashes.
2. To adjust set temperature press or
button.
3. To confirm press button or wait.