APPENDICES
28
G DIMENSIONAL DRAWINGS
On the following ones you will find dimensional drawings of the
conventional flue Cupido models with some of the important
dimensions that you have to take into account when installing
and installing your fireplace.
When you install the Cupido models in an existing chimney,
there are two possible exhaust ports, respecively on top and on
the back of the fireplace.
One of the both needs to be open, the other is than closed off.
The top flue exhaust can be used to attached a flue pipe to. The
back of the fireplace can be used when no flue is used, but the
fireplace is only put inside the chimney.
NB:
Opening up the back exhaust hole, stops debree from falling
directly into the combustion chamber. To ensure a convection
airflow around the fire, leave more room between the back of
the fire and the wall.
