14
INSTALLATION MANUAL
The app has a user friendly, interactive layout and the design is
adjusted for Element4 devices. Up to eight devices can be used
with one app, in the situation that multiple fire are installed in
the same location.
Another functionality of the app is to pre-set the temperature
of you device, for a period of one week, to ensure yourself of an
optimal desired room temperature. Also the device can changed
between high and low flames and it features an eco-setting.
The amount of users, that can operate the device is unlimited,
so every family member can make use of it, by easily making a
personal account. By two-way communication, one can check
on the device at any moment.
To use the app, the device needs to be provided with the correct
receiver and remote combination.
Necessities for the installation of the ProControl:
•
220 volt electricty near the fire
•
Wi-Fi code of the router
•
Smart Phone or tablet
•
ProControl manual
Should any problems occur you can always check
APPENDIX B
.
9 ELECTRICAL CIRCUIT
Figure 9.1
shows a simplified connection circuit for the fireplace.
Every fireplace is provided with a main adapter.
#
Omschrijving
(1)
Gas Block
(2)
Receiver
(3)
Main Burner
(4)
Log Burners
(5)
Pilot set
(6)
Adapter 6V
(7)
Wifi-Box
9.1 Domotica
The receiver off ers the possibility to be connected to a domotica
system. A special connector is being supplied for this. Type: G60-
ZCE
9.2 Element4 ProControl App.
It is possible to operate your device via smartphone or tablet
with the ProControl App, available in the appstore on iOS and
google play on Android.
(2)
RELAIS
AUX
MODULE
(1)
(8)
(7)
(6)
MERTIK MAXITROL
LED 1
LED 2
Receiver
RESET
(4)
(5)
(3)
Figure 9.1 - Schematic Electronic Circuit
