3
TECHNISCHE DATEN
DEUTSCH
Betriebsspannung:
230 V AC (+/-10%) / 50-60 Hz
Leistungsaufnahme:
ca. 1,5 VA
Funktionsbereich:
-15 °C / +40 °C
Schutzart:
IP 20
Schalldruck Summer:
90 dB (Abstand 10 cm)
Kabellänge:
2,5 m
Außenmaße (HxBxT):
118x60x44 mm
Datendiagramm
Sensor
Gastyp
Auslösung lt.
Diagramm
Mindest-
konzentration
CO
keine Auslösung
keine Auslösung
Methan
2500ppm (0,25%)
<0,5%
Propan (Isobutan)
1000ppm (0,1%)
<0,2%
Ethanol (Aceton)
2500ppm (0,25%)
<0,5%
Achten Sie unbedingt auf die vorgeschriebene Montagehöhe des Sensors!
Bitte informieren Sie sich zu Ihrer eigenen Sicherheit bei Ihrem Versorgungs-
unternehmen über entsprechenden Gastyp und dessen Eigenschaften!
BESTIMMUNGSGEMÄSSE VERWENDUNG
Der GAS ALARM GX-B2 mit externem Sensor ist ein Gasmelder für Stadt-, Erd- und Flüs
-
siggas und warnt bereits bei einer Gaskonzentration, die weit unter dem lebensbedrohli
-
chen Wert liegt. Dieses Überwachungssystem ist deshalb seinem Zweck entsprechend sehr
empfindlich eingestellt (s. Tabelle TECHNISCHE DATEN). Das Warnsignal erfolgt akustisch
und optisch. Das Gerät ist geeignet für den normalen Haushaltsgebrauch und darf
nicht in
explosionsgefährdeten Räumen eingesetzt werden.
Für eine andere Verwendung, als zuvor beschrieben, ist das Gerät nicht zugelassen.
MONTAGEANLEITUNG
Der GAS ALARM GX-B2 und der Sensor dürfen
nur
in trockenen Innenräumen installiert
und müssen je nach Gastyp richtig platziert werden, damit eine einwandfreie Funktion des
Warngerätes gewährleistet ist.