16
EN
Operating and assembly instructions HRD BOOSTED
www.elektror.com
016341 03.14/07
As manufacturer,
Elektror airsystems gmbh
Hellmuth-Hirth-Strasse 2
D-73760 Ostfi ldern
herewith declares that the product, to which this declaration relates, complies with the following essential requirements of the Ma-
chinery Directive (2006/42/EC).
Description of the partially completed machine:
High pressure blower HRD 7 FU-120; HRD 60 FU-135; HRD 2 FU-130
The serial number and year of manufacture can be found on the rating place and the corresponding delivery note.
Description of the essential requirements of Machinery Directive (2006/42/EC), with which the partially completed machine
complies:
Machinery Directive (2006/42/EC):
Annex I, Articles 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.1, 1.6.1, 1.7.1, 1.7.
Electromagnetic Compatibility Directive (2004/108/EC)
Eco-design Directive for Energy-related Products (2009/125/EC)
The partially completed machine described here continues to fulfi l the protective regulations of the
Low Voltage Directive (2006/95/
EC)
according to Annex I, No. 1.5.1 of the Machinery Directive.
The commissioning of the partially completed machine is not permitted until it has been verifi ed that the machine in which the partially
completed machine is to be installed, complies with the provisions of the Machinery Directive (2006/42/EC).
The following harmonised standards have been applied:
DIN EN 12100-1
Safety of machinery – Basic concepts, general principles for design,
Part 1: Basic terminology, methodology
DIN EN 12100-2
Safety of machinery – Basic concepts, general principles for design,
Part 2: Technical principles and specifi cations
DIN EN 60034-1
Rotating electrical machines, Part 1: Rating and performance
DIN EN 60034-5
Rotating electrical machines, Part 5: Degrees of protection provided by the integral design of
rotating electrical machines (IP code) – Classifi cation
DIN EN 60204-1
Safety of machinery – Electrical equipment of machines,
Part 1: General requirements
DIN EN 60664-1
Insulation coordination for equipment within low-voltage systems,
Part 1: Principles, requirements and tests
As manufacturer, Elektror airsystems gmbh undertakes to forward the special technical documentation in respect of the partially
completed machine to national authorities at their request. The special technical documentation in respect of this partially completed
machine according to Appendix VII Part B has been created.
The person responsible for the documentation is Mr Steffen Gagg, Tel. +49(0)711/31973-124.
Kreher (Managing Director)
Ostfi ldern, 02.05.2013
8 DECLARATION OF INSTALLATION CONFORMITY PURSUANT TO ANNEX II 1 B
