Measurement Unit
E-13 ElektroPhysik
〖
6.4.4
〗
Measurement Unit
Users can select the displayed accuracy and the measuring unit. When
selecting the high accuracy, the workpiece surface to be measured should
be smooth, for the purpose of get a accurate value.
Note: when probe U5.0 and U2.0 is selected, it is recommended to
use 0.1 mm and 0.01in.
〖
6.4.5
〗
Gain setting
In the user's measuring environment, both different materials and the same
material with different status will have different effects on the accurate
and stable measuring. So for different measured objects and different
measuring environment, users should adjust the work status of the
instrument to meet more measurements.
For many materials and measuring conditions, auto gain adjustment can be
used, but for some special measurement, adjusting the instrument's
working status is necessary. There are four different working modes: Auto,
Low, medium and high.
Auto
:
match different probe and meets almost all the measuring
requirements.
Low
:
Suitable for high scattering and small attenuation materials
Medium
: Suitable for many measurements.
