Measuring mode
E-9 ElektroPhysik
〖
6.4.1
〗
Measuring mode
There are five measuring modes provided, users can select different
measuring modes according to their requirements and measuring
environments.
Standard measurement
: display the current value, satisfied with the
normal measuring needs.
Minimum value measurement
: Among one measurement
，
display the
minimum value of the current measured point. It is suitable for testing the
curvature surface or needs to get the minimum value which is widely used
in the thickness measurement of pipeline.
Note: it is not recommended to use this function when measuring
cast iron or alloy materials
Differential mode
: display the accurate differential value between the
measured value and reference value set by the users, suitable for
quality check to identifying the qualified products whose thickness is in
the admissive error.
Upper and lower limit setting
: set the upper and lower limit, when the
measured thickness exceeds the preset limit, it will display and give
alarm, this measurement mode is more widely used than differential
mode.
Scan mode
: This mode is recommended to measure the high temperature
work-piece.
After going to the measuring mode, the instrument display:
