10. THE SEQUENCER
38
1. Press
[BANK]
+
[TRIG 9–16]
key to select bank.
2. Press and hold
[PTN]
and then press a
[TRIG 1–16]
key to select the first pattern in the chain.
3. Release the
[PTN]
key and then press
[TRIG 1–16]
keys in the same order as you want the chained
patterns to play. Keep the previous
[TRIG]
key pressed while you press the next one, the one after that
and so on so that the sequencer can recognize that you are building a chain and not just switching
patterns. You can press the same
[TRIG]
key again if you wish to add the pattern multiple times in a row.
4. Press
[PLAY]
to start the sequencer and play the chain. The chain will loop when the final pattern of
the chain has played.
Please note that the chain will be lost when you create a new chain or when you select a new
bank/pattern. Also, chains cannot be saved and are lost when you switch the Digitone off.
•
It is possible to create chains while the sequencer is running.
•
You can also use MIDI program change messages from an external device to change
patterns on the Digitone. For more information, please see “14.3.1 SYNC” on page 60.
.