10. THE SEQUENCER
29
10.2.4 GRID RECORDING USING QUICK NOTE METHOD
This is yet another alternative way to enter note trigs in GRID RECORDING mode that gives you better
control over what note values you want to add to a specific step in the sequencer.
1. Press
[TRACK 1–4]
to select the track to which you want to add note trigs and additional notes. A
green
[TRACK]
key light indicates the active track.
2. Press
[RECORD]
to enter GRID RECORDING mode. The
[RECORD]
key lights up red to indicate
that GRID RECORDING mode is active.
3. Press and hold (keep holding until step 8 of this procedure) the
[TRIG]
key to where you want to
add, adjust or remove notes and then press
[UP]
or.
[DOWN]
A graphic mini keyboard appears
at the top the screen. The leftmost number is the active note. The number in brackets shows the
number of notes on the sequencer step. Then follows the note value of the active note. A filled key
on the screen keyboard shows the active note and the other notes are shown as dots.
4. Use the
[UP]
and
[DOWN]
keys to adjust the value of the note. Press and hold
[FUNCTION]
and
press
[UP]
or
[DOWN]
key to adjust the pitch one full octave up or down.
5. Press
[YES]
to enter a new note
.
Then again use the
[UP]
and
[DOWN]
keys to move the added
note to the desired note value.
6. Use the
[LEFT]
and
[RIGHT]
keys to navigate to a previously added note and then press
[UP]
or
[DOWN]
to move the note. Note 1 is the root note. The other notes are offsets to the root note. If
you adjust the root note value, the other notes moves along with it.
7. Press
[NO]
if you wish to remove an already added note.
8. Release the
[TRIG]
key to Quick Note editing.
10.2.5 LIVE RECORDING MODE
LIVE RECORDING mode is the second method of adding trigs to the tracks. In this recording mode,
the
[TRIG]
keys are played in real time to input trigs to the tracks. You can also turn the
DATA ENTRY
knobs to enter parameter locks in real time. Trigs input in LIVE RECORDING mode can be automatically
quantized or not. Use the settings in the QUANTIZE menu to quantize non-quantized trigs after they are
recorded. For more information, please see “10.7.1 QUANTIZE” on page 32.
1. Press
[TRACK 1–4]
to select the track to which you want to add trigs. A green
[TRACK]
key light
indicates the active track.
2. Press and hold
[RECORD]
, then press
[PLAY]
to enter LIVE RECORDING mode. If you quickly
press
[PLAY]
twice while keeping the
[RECORD]
key pressed, you activate/deactivate the quan-
tization of LIVE RECORDING. The sequencer starts to play, and the
[RECORD]
key starts to flash
red.
3. Press the
[TRIG]
keys to enter trigs in real time. The
[TRIG]
key pressed determines the pitch value
of the note trig. The sequencer also records all changes to the PARAMETER pages settings you
make when you turn the
DATA ENTRY
knobs as parameter locks and adds lock trigs accordingly.
4. Press
[PLAY]
to exit LIVE RECORDING mode while keeping the sequencer playing. GRID RE-
CORDING mode is activated if you press
[RECORD]
while LIVE RECORDING mode is active.
5. Press
[STOP]
to stop both recording and playback of the sequencer.
To exit LIVE RECORDING mode while keeping the sequencer playing, press
[PLAY]
.