12. CONFIG MENU
44
INP FROM
selects the source Model:Cycles receives MIDI data from.
•
OFF
makes Model:Cycles disregard any incoming MIDI data.
•
MID
makes Model:Cycles listen only to MIDI data sent to the MIDI IN port.
•
USB
makes Model:Cycles listen only to MIDI data sent to the USB port.
•
M+U
makes Model:Cycles listen to MIDI data sent to both the MIDI IN and USB ports.
OUT TO
selects the destination to which Model:Cycles will send MIDI data.
•
OFF
stops Model:Cycles from sending out any MIDI data.
•
MID
makes Model:Cycles send MIDI data to the MIDI OUT port only.
•
USB
makes Model:Cycles send MIDI data to the USB port only.
•
M+U
makes Model:Cycles send MIDI data to both the MIDI OUT and USB ports. This setting will slow
the data transfer over USB down to the max speed for data transfer over MIDI.
OUT POL
OUT
Output polarity
sets the polarity of the MIDI OUT port to accommodate the two different
versions of 3.5 mm (Tip/Ring/Sleeve) to female 5 pin DIN cable wiring. The MIDI IN port accepts any
polarity and does not need to be configured.
•
STD
Standard (“Type A”, Tip: current sink, Ring: current source, Sleeve: shield)
•
INV
Inverted (“Type B”, Tip: current source, Ring: current sink, Sleeve: shield)
OUT/THRU
sets if the MIDI OUT/THRU port should function as an OUT or THRU port.
12.3.5 FILTER
Here you find the MIDI filter related settings. Use
LEVEL/DATA
to browse and change the settings.
RCV NOTE
will when active, make it possible to play Model:Cycles using an external MIDI keyboard or
controller.
RCV CC
will when active make it possible to control Model:Cycles parameters from an external MIDI
device sending CC/NRPN data.
ENCS
controls whether the
TRACK PARAMETER, FX PARAMETER
and
LEVEL/DATA
knobs sends
MIDI data or not.
•
INT
The knobs only affect the Model:Cycles and does not send any MIDI data.
•
I+E
The knobs affect the Model:Cycles and also send MIDI data to external devices.
If ENCS is set to INT, the encoders will not send MIDI to external devices even if the
track is set to send MIDI out. For more information, please see
.
12.4 AUDIO
In this menu, you specify audio-related settings for the Model:Cycles. Use
LEVEL/DATA
to browse and
change the settings.
12.4.1 HP MAX
The parameter sets the limit of the Headphones volume. This setting is useful if you want to have differ-
ent volume settings for MAIN out and HEADPHONES OUT, for example to protect your ears and your