11. FX PARAMETERS
40
11. FX PARAMETERS
In this chapter we will have a look at the Model:Cycles effect parameters.
11.1 REVERB
The Reverb send effect controls the persistence, and ambient characteristics, of the sound reverberations.
It can simulate many different sonic locations, from huge spaces to small rooms.
11.1.1 REVERB SIZE
Sets the length of the decay time of the reverberated signal, essentially setting the size of the acoustic
space. (1–127, INF)
11.1.2 REV TONE
Reverb Tone changes the tone of the reverb by dampening either the low frequencies or the high fre-
quencies of the reverberated signal. The parameter is bipolar. Positive values dampen the low frequen-
cies. Negative values dampen the high frequencies. Press
[FUNC]
and then turn
REVERB SIZE
to access
the
REV TONE
parameter. (-64–63)
11.2 DELAY
The Delay send effect takes the input signal, delays it in time and then blends it with the original signal.
11.2.1 DELAY TIME
Delay Time sets the delay time. It is relative to the current BPM and measured in 128th notes.
(1.00–128.00)
TIME setting Divide ratio
1
1/128
2
1/64
3
1/64.
4
1/32
6
1/32.
8
1/16
12
1/16.
16
1/8
24
1/8.
32
1/4
48
1/4.
64
1/2
96
1/2.
128
1
11.2.2 DEL FEEDBACK
Delay Feedback sets the amount of delay output signal to feed back into the input of the delay. With
higher parameter settings, infinite and/or swelling delays are possible. Please be aware that high feed-
back can lead to a very loud signal. Press
[FUNC]
and then turn
DELAY TIME
to access the
DEL FEED-
BACK
parameter. (0–198)