Elektron Analog Four MKII, User Manual

Page: 27 / 108

9. KITS AND SOUNDS
27
9.3.5 PERFORMANCE MIXER
Press [MIX] to open the PERFORMANCE MIXER menu. In this menu, the level of the tracks can be
controlled with DATA ENTRY knobs A-E .
9.4 QUICK PERFORMANCE
Quick performance gives you the possibility to control one of your performance macros without being in
PERFORMANCE mode. Press
[QPER] + [TRIG 1–10]
key to select which performance macro you want to
control with Quick performance. The [TRIG 1–10] keys correlates to the 10 performance macros you have at
your disposal. For more information, please see “9.3.2 PERFORMANCE CONFIGURE” on page 25. Once
you have selected which performance macro to control, use the QUICK PERF AMOUNT knob to control
how much the performance macro will affect the tracks.
9.5 POLYPHONY
Four voice polyphony can be configured by selecting POLY CONFIG in the KIT menu. The Analog Four
MKII is capable of four voice multitimbral polyphony (or unison). This is possible due to the powerful sound
engine which is able to change sound instantly and allow completely dynamic voice allocation (see figure
below). The sequencer is fully polyphonic, allowing overlapping notes and chords to be programmed on the
tracks. Any track can play up to four notes using its track sound. Notes are distributed to the synth voices
according to the selected allocation method. Any of the synth voices can also be poly-disabled, allowing
tracks to have their dedicated, monophonic synth voice available at all times. The poly configuration is
stored per kit, for maximum flexibility, allowing up to 128 different poly configurations per project.
MONOPHONIC POLYPHONIC
TRACK 1
TRACK 2
TRACK 3
TRACK 4
VOICE A
VOICE B
VOICE C
VOICE D
TRACK 1
TRACK 2
TRACK 3
TRACK 4
VOICE A
VOICE B
VOICE C
VOICE D
9.5.1 POLYPHONY CONFIGURATION
The settings for up to four voice polyphony are found in the POLY CONFIG menu in the KIT menu.
Press [FUNC] + [MIX] to access the POLY CONFIG menu directly.
VOICES Select any combination of the four voices to be poly activated by using the [LEFT] and [RIGHT]
arrow keys. Tick or untick a box by pressing the [YES] key. To activate/deactivate voice 1–4 directly,