Elektron Analog Four MKII, User Manual

Page: 25 / 108

9. KITS AND SOUNDS
25
By default, the parameter macro knob spans a parameter value range of 0–127. A parameter macro value
of 0 will not introduce any changes to the sound.
The bar on the left in the screen shows a graphical representation of the incoming signal.
9.2.9 CONTROL 2 IN MOD
Same as CONTROL 1 IN MOD but for Control In 2.
Copy, clear and paste operations are available in the LOAD KIT, SAVE KIT and PERFOR-
MANCE SETUP menus.
Press and turn the
TRACK LEVEL
knob to increase scrolling speed in the LOAD KIT and
SAVE KIT menus.
Once you have assembled a kit you like, you are advised to save it.
An asterisk after the kit name indicates kits that are not used by any pattern.
9.3 PERFORMANCE MODE
The PERFORMANCE mode makes it possible to control five track parameters, which can be chosen from
any track, at the same time by turning a single DATA ENTRY knob. This is called a performance macro.
Track muting and an overview of all synth and FX track levels are available in this mode as well. The PER-
FORMANCE mode settings are saved as a part of a kit.
Access the PERFORMANCE mode by pressing the
[PERF] key.
The ten available performance macros are seen in the PERFORMANCE menu. Turn the DATA ENTRY knobs
to adjust the performance macro settings. The graphics indicating the active kit will briefly change to reflect
the mute status of the tracks.
9.3.1 PERFORMANCE SETUP MENU
The PERFORMANCE SETUP menu is used to set up the ten performance macros available in the PER-
FORMANCE mode. Access this menu by pressing [FUNC] + [PERF].
The collection of all ten performance macros can be copied, cleared and pasted while in
this menu.
9.3.2 PERFORMANCE CONFIGURE
Here is where you assign parameters to the performance macros. When you select this option, the list of
performance macros and the knobs they are assigned to, are displayed. In this menu, individual perfor-
mance macros can be copied, cleared and pasted.