background image

Page 4

EA Elektro-Automatik GmbH

Helmholtzstr. 31-37 • 41747 Viersen

Germany

Fon: +49 2162 / 3785-0

Fax: +49 2162 / 16230

www.elektroautomatik.de

[email protected]

PS 2000 B Triple Series

1. 

General

1.1 

About this document

1.1.1  Retention and use

This document is to be kept in the vicinity of the equipment for future reference and explanation of the operation of 

the device. This document is to be delivered and kept with the equipment in case of change of location and/or user. 

1.1.2  Copyright

Reprinting, copying, also partially, usage for other purposes as foreseen of this manual are forbidden and breach 

may lead to legal process.

1.1.3  Validity

This manual is valid for the following equipment 

with color TFT display

:

Model

Article nr.

Model

Article nr.

PS 2342-06 B

39 200 120

PS 2384-03 B

39 200 125

PS 2342-10 B

39 200 121

PS 2384-05 B

39 200 126

1.1.4  Symbols and warnings

Warning and safety notices as well as general notices in this document are shown in a box with a symbol as follows:

Symbol for a life threatening danger

Symbol for general safety notices (instructions and damage protection bans)

Symbol for general notices

1.2 

Warranty

EA Elektro-Automatik guarantees the functional competence of the device within the stated performance param-

eters. The warranty period begins with the delivery of free from defects equipment.
Terms of guarantee are included in the general terms and conditions of EA Elektro-Automatik.

1.3 

Limit of liability

All statements and instructions in this manual are based on current norms and regulations, up-to-date technology 

and our long term knowledge and experience. EA Elektro-Automatik accepts no liability for losses due to:

• 

Usage for purposes other than defined

• 

Use by untrained personnel

• 

Rebuilding by the customer

• 

Technical changes

• 

Use of non authorized spare parts

The actual delivered device(s) may differ from the explanations and diagrams given here due to latest technical 

changes or due to customized models with the inclusion of additionally ordered options.

Summary of Contents for 39 200 120





























Reviews: