elektraLite LXE 700 Wash, User Manual

Page: 9 / 19

-
８
- LXE700 wash
The Display Panel:
Default settings shaded.
VALU A001~AXXX (AXXX) DMX address setting
SLAV SLA1/ SLA2/ SLA3 Slave setting
ADDR
EBOC ON/OFF
Change DMX address via
external controller
ALON (AU-A) Automatic Run in Stand Alone
AUTO
MAST (AU-M) Automatic Run as Master
ALON (SO-A)
Sound-controlled Run in Stand
Alone
RUN
SOUN
MAST (SO-M) Sound-controlled Run as Master
VALU D–XX D-00 (DXXX)
Display the DMX 512 value of
each channel
RDIS ON/OFF Reverse display
0
MODE
DISP
CLDI ON/OFF Shut off LED display
OPEN ON/OFF Lamp on/off
LAAU ON/OFF Lamp automated on with power
ONLI ON/OFF Lamp on/off via controller
1
LAMP
DELA D–XX D-05 Delay lamp on
RPAN ON/OFF Pan Reverse
RTIL ON/OFF Tilt Reverse
16BI ON/OFF Switch 16 bit/8 bit
DEGR 630/540 Pan degree select
MIC M-XX Mic sensitivity
AUTO Clos/Hold/Auto/Audi
No DMX Status
FANS HIGH/AUTO Fan’s mode select
SPEE SP-1/SP-2 Movement Mode Select
REST Reset
LODA ON/OFF Restore factory settings
2
SET
VER V-1.0~V-9.9 Software version
LADJ ON/OFF Lamp adjustment
TEST T–01~T–30 Test function of each channel
CODE CXXX Fixture code *code is “C050”
3
ADJU
WHEL
CH01~CH30 XXXX(-128~127) Motor Fix
LIFE 0000~9999(hours) Fixture running time
LAMP 0000~9999(hours) Lamp running time
CODE CXXX (Password is 038) Clear Timer Password
CLFE ON/OFF Clear fixture time
4
TIME
CLMP ON/OFF Clear lamp time
STEP S–01 ~S–48 Steps of Program Run
REC. RE.XX Auto Save Scene
C–01~C–30
0 1 XX(00~FFH)
3 0 XX(00~FFH)
Edit the channels of each scene
TIME XXXX(000.2s~199.8s) Time for each scene
5
EDIT
SC01
~ SC48
CNIN ON/OFF Edit program via controller