elektraLite LXE 700 Wash, User Manual

Page: 3 / 19

-
２
- LXE700 wash
Safety Instructions.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in
this user manual.
LXE 700 Wash
is a high voltage fixture. Be careful when dealing with high voltages.
Please read this manual. If you do not read this manual and damages occur to LXE 700 Wash, then it
could void the warranty.
During shipping,
LXE 700 Wash
may have been exposed to high temperature changes or humidity changes.
So, as a precaution, do not switch
LXE 700 Wash
on immediately. Condensation can damage
LXE 700 Wash
so leave
LXE 700 Wash
switched off until it has reached room temperature.
The electric connection must be carry out by a qualified person and it is absolutely essential that
LXE 700
Wash
be
grounded
.
Always disconnect
LXE 700 Wash
from the power source, when the device is not in use or before cleaning it.
Only unplug
LXE 700 Wash
from the power cord. Never pull out the plug out by pulling on the power cord.
Take care, LXE 700 Wash will heat up when it is turned on and it will be very hot to touch.
Please keep
LXE 700 Wash
away from children and the general public. Please be intelligent and use common
sense when operating
LXE 700 Wash.
General Guidelines.
LXE 700 Wash
is a lighting fixture for professional use on stages, in theatres, arenas, churches and so on.
LXE700 Wash
should only be operated at 120 volts and only indoors.
LXE 700 Wash
should not be operated 24/7 (24 hours a day; 7 days a week).
LXE 700 Wash
needs operation
breaks to ensure that it will work for a long time without problems. Please do not shake
LXE 700 Wash
and
avoid using brute force when installing or operating it.
When choosing the location to install
LXE 700 Wash
, please make sure that it is not exposed to extreme heat,
moisture or dust. The minimum distance between
LXE 700 Wash
and the illuminated surface must be more
than 10 feet.
Always mount
LXE 700 Wash
with an appropriate safety cable. If you use the quick lock cam to hang
LXE 700
Wash
please make sure the 4 quick lock fasteners are
locked into position correctly.
Operate
LXE 700 Wash
only when you are familiar with the features on the fixture. Do not permit operation by
persons not qualified for operating it.
All modifications to
LXE 700 Wash will invalidate the warranty. There are absolutely no exceptions.
If
LXE 700 Wash
is operated in any way different to the one described in this manual,
LXE 700 Wash
maybe
damaged and the guarantee will be void.