elektraLite LXE 700 Wash User Manual Download Page 12

11

 -                                     LXE700 wash 

 

Channel Functions:

 

         

 

CHANNEL  1 :

 color wheel 8 colors plus white, color cycle or rainbow effect 

CHANNEL  2 : 

cyan color mixing   

CHANNEL  3 : 

magenta color mixing

 

CHANNEL  4 : 

yellow color mixing 

CHANNEL  5 :

 pan movement (max. 630°)

 

CHANNEL  6 : 

tilt movement (max. 265°) 

CHANNEL  7 :

 speed of pan/tilt movement, or different blackout selection by wheels 

CHANNEL  8 :

 Effect wheel. The beam shaper 

CHANNEL  9 :

 Linear Zoom 

CHANNEL 10 : 

Strobe effect maximum 15 flashes per second or random strobe, dimming and shutter 

  close/open control 

CHANNEL 11 :

 Dimming effect 0-100% (only be activated while CHANNEL 10 is between 

position 32 –63 DMX 

or

 between position 96-127 

or

 between position 160-191 

or

   

between position 224-255 values). 

CHANNEL 12 : 

Speed of CMY and dimmer.

 

CHANNEL 13 : 

Color Macros. CMY and color wheel.

 

CHANNEL 14 :

 auto program c lamp on, motor reset, lamp switch off 

CHANNEL 15 : 

16 bit pan movement (fine movement). 

CHANNEL 16 :

 16 bit tilt movement (fine movement). 

Summary of Contents for LXE 700 Wash




















Reviews: