the other end of the lamp into the other lampholder contact.
Do not touch the glass bulb. Fingerprints or other contamination will
reduce lamp life.
OPERATION
After switch on, the lamp will increase in brightness slowly, reaching
full brightness after approximately 5 minutes. Whilst warming up,
some flickering may be evident.
When switched off, the lamp will not re-ignite until it has cooled
down. This may take as long as 10 minutes. Do not switch on again
until the lamp has cooled down.
The L300B/BW may not be connected to the output of a light
dimmer.
It is inadvisable to connect to a presence detection circuit: as the
lamp will not re-ignite until is has cooled down, the presence
detection may be ineffective. Also, repeated on-and-off switching will
reduce lamp life.
The L300B/BW may be connected to a dusk-to-dawn light level
detector circuit.
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household
waste.
Most local authorities have specific collection system for appliances
and disposal is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance
your retailer may take the old appliance for disposal.
Page 3
