background image

IMPORTANT

Installer and Users please note:

These instructions should be read carefully and left with the user of the product for future 

reference.

BEFORE USE

Inspect the product for any signs of damage. If the product is damaged, DO NOT use it, 

and contact your supplier immediately

PRODUCT SAFETY

• 

Prior to the installation of this product, the installation instructions should be read 

and completely understood. The installation instructions must be read to prevent 

personal injury and property damage. Keep these installation instructions in an easily 

accessible location for future reference.

• 

CAUTION: The maximum load capacity is 25Kg. Use with products exceeding the 

maximum load capacity may cause serious injury. See appliance instructions.

• 

Do not install on a structure that is prone to vibration, movement or chance of impact. 

Failure to do so could result in damage to the display and/or damage to the stand.

• 

Do not place near heater, fireplace, air conditioning, in direct sunlight, or any other 

heat producing source. Failure to do so may result in damage to the display and could 

increase the risk of fire.

• 

It is recommended that two people perform the installation. Injury and/or damage can 

result from dropping or mishandling the display.

• 

The enclosed instructions are an aid to installation and cannot cover all eventualities, 

if you have any concerns regarding the mounting of the arm or brackets you should 

consult an expert.

• 

CAUTION: Before installation the mounting area should be checked that it is suitable 

for the weight of the bracket and screen and is free from pipes, electric cables or any 

other obstructions.

Summary of Contents for A195FB







Reviews: