Electrovision A195FB, User Manual

Page: 3 / 6

No Part Qty No Part Qty
A M4 x 12mm 4 E Plug 8 x 40mm 3
B M5 x 12mm 4 F1 Washer 4
C M6 x 12mm 4 F2 M6 Washer 3
D ST6 x 50mm 3
TV MOUNTING ACCESSORIES
TOOLS REQUIRED
STUD WALL FITTING INSTRUCTIONS
• Select a suitable position to mount the arm.
• It is recommended that the arm is mounted using the supplied bolts to the wooden
supports behind the plasterboard. If you wish to mount directly to the plasterboard a
survey of the plasterboard must be taken by suitably qualified installers and the correct
mounting hardware must be purchased. The bolts and plugs provided are not suitable
for this purpose.
• Use a stud detector to locate the centre points of a suitable wooden support.
• Mark the holes required.
• Drill pilot holes 3mm diameter by 50mm deep in the supports.
• Attach the arm to the wall using the 6x50mm bolts (D) and M6 washers (F2), the bolts
should be tightened using a 12mm / 1/2 inch socket wrench or spanner.
D
F2