Electrothermal INTEGRITY 10 Instruction Book Download Page 32

Page: 32 / 80

Page 32 of 80

M8024 Issue 3.4

For use with master product

software V3.5.1.8 and above.

7.11.14. Use the keypad to enter the time value. To except the entered value touch the green tick. To clear

the data field touch the ‘red cross’. If you have changed your mind and no longer wish to set a
maximum

Upper limit touch the back button to return to the previous screen and the touch the ‘red

cross’.

7.11.15.

Final Temperature.

The final temperature is the temperature you wish the profile conclude the step

at. Touch the field to select the keypad for entering the required settings.

7.11.16. Use the keypad to enter the final temperature value. This can be a negative value as well as a

positive.

Note:

To enter -25.6 Press 2, then 5, then 6, followed by the minus sign.

Summary of Contents for INTEGRITY 10

















































































Search results

Summary of Contents for INTEGRITY 10

Reviews:

Related manuals for INTEGRITY 10

Brands by name

Popular brands

Electrothermal INTEGRITY 10, Instruction Book

Search results

Summary of Contents for INTEGRITY 10

Reviews:

Related manuals for INTEGRITY 10

Brands by name

Popular brands