Page 17 of 80
M8024 Issue 3.4
For use with master product
software V3.5.1.8 and above.
7.6.2.
After the Splash screen has been displayed the home screen will come into view.
7.7. Clock and Date Setting.
The first time the Integrity 10 system is used the time clock and date must be set. The clock and date
setting is performed using the following method. Accurate clock time is required when using data
storage facility as experiment data stored is time stamped.
7.7.1.
With the Integrity 10 connected to mains power and water supply as detailed section 5, turn on as
7.7.2.
A splash screen will appear to indicate the unit is functioning and performing a self check activity.
7.7.3.
A home screen will appear. Touch the settings Icon to enter settings mode.
Note: Setting mode cannot be accessed if any cell positions are in use.
7.7.4.
Touch the clock Icon to enter the clock and date settings mode.
