Page 28 of 80
M8024 Issue 3.4
For use with master product
software V3.5.1.8 and above.
7.11.4.
Initial temperature.
Touch the initial temperature field to active the field input screen. Use the
keypad to input your required start temperature. The initial start temperature is the temperature you
wish the profile to commence from. It can be different to the ambient temperature of the cell.
Note:
To enter -25.6 Press 2, then 5, then 6, followed by the minus sign.
Note:
the
– minus symbol will only appear once the entire temperature has been entered
.
As with manual control the
will take you back to the previous screen. This
button is used
to except a value and the
is used to remove an incorrect field entry. Use the keypad to enter
you initial start temperature.
7.11.5.
Initial hold time
is a similar in operation to the previous field. Touch the field to enter the required
setting. All white field boxes must have a value entered. Grey field boxes are option setting and do not
need to have a setting entered.
Note:
Once a field has had an entry made, it is then possible to re-enter that field at anytime during
any part of the profile setup procedure to amend any setting the user wishes to adjust.
