Electrotherm Shenpaz Gemini LT, User Manual, Page: 16 / 81

Gemini LT user manual version 1.3.18 17 | P a g e
2. Lift Positions
– Opening
(program-specific)
3-Tempering: opening of the table for every cycle
•
•
Preset of closing and opening of every program can be set in this section also, follow
the info on the screen:
Navigate with the arrows, write the new value within the limit and save
4. E
DITING THE
P
ROGRAM
N
AME
:
Selection of lift parameters
when opening.
Press the arrow keys , numeric
keys and ENTER to edit. The
respective lift path is edited in
the left column, whereas the
halt periods are edited in % in
the right column (relative to the
complete “lift open” time of the
respective program).