Electrotherm Shenpaz Gemini LT, User Manual, Page: 13 / 81

Gemini LT user manual version 1.3.18 14 | P a g e
Pre-heating Program
Important note:
During transportation, storage and non-use, the isolation material of the muffle may absorb
humidity. In order to avoid damages to the vacuum and heating system and in order to always
obtain repeatable quality firing results, it is recommended that the user run the pre-heating
program (program digit 1) at the beginning of such periods. This is always recommended if the
furnace has been completely cooled down after operation
Menu Functions
To access the MENU, use the Menu key . There are 6sub-entries:
Use numeric keys to make a selection.
0. T
URN OFF FURNACE TO LOGO
press "0" "ent" to go to the Logo screen without turning off the furnace from the main
switch
1. V
IEW CURRENT PROGRAM
:
This function allows you to view also the program parameter, one by one in addition to the
direct access to the parameters from the main screen with the arrow down and up.
2. O
PTIONS
:
Allow you to configure your furnace default parameters, C°/F°/mmHg/Mbar/HPa, calibration
adjustment, pump cooling, Language, time to graph, 11 parameters or 13 parameters, vacuum
level preset.
* if the value of the vacuum is preset they will not appear on the parameters screen.
By changing options in this screen, display configurations will automatically appear depending
on option selected.