background image

1

U.S. Patent No. 11,027,991 and other U.S. and Foreign Patents Pending

COPYRIGHT © 2022

No part of this publication may be reproduced, translated, stored in a retrieval system, or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise 

without prior written consent by ElectroSea, LLC. Every precaution has been taken in the preparation of this manual to ensure its accuracy. ElectroSea assumes no responsibility for errors and 

omission. Neither is any liability assumed for damages resulting from the use of this product and information contained herein.

1

Table of Contents

Introduction

Table of Contents 

 

 

1

ElectroSea and ElectroStrainer System 

2

Components  

3

Safety and Pre-Installation Descaling 

 

4

Optimal Performance & Maintenance

Optimal Performance and Strainer Flow Alert 

 

5

Cell Indicator  

6

Installation Overview

Electrical Connection Overview  

7

Seawater Connection Overview  

8

Canister Assembly

Canister Preparation 

 

 

9

Mounting Options 

10

ClearVis

 Flow Sensor 

 

11-12

Chlorinated Return Line

  

13

Reassembly  

14

Control Unit

Mounting and Wiring  

 

15

Specifications

Specifications  

 

16

Warranty

Warranty Terms and Conditions  

 

17-18

Summary of Contents for ElectroStrainer ES-100





















Reviews: