www.electronline.cl
T: 02-23023149
8
6.7.3 Delete authorization: Send SMS “ npspace+authorized number” to delete
the authorized number.
6.7.4 If you want to track the target tracker device while aboard, please add your country code in
front of your number, e.g. admin123456 008613322221111
6.8. 2.4G Attendance Management (Model B)
With the built-in 2.4G transmitter module, model B can work with attendance management
center for automatic attendance management for vehicles.
The content to be sent by the 2.4G transmitter module can be configured, and default content is
the tracker’s IMEI, e.g, send “carid+pspace+YB888888” to tracker device, it will set
the license number as the message . “YB888888”is the license number, it should be combination
of character and numbers, less than 15 byte.
6.9. Configure how OBD data to be sent to Server Center
Send sms command “Obdii+pspace+0” to gps device, OBD data will be turned off.
Send sms command “Obdii+pspace+1” to gps device, OBD data will be sent both
when multi tracking and single tracking.
Send sms command “Obdii+pspace+2” to gps device, OBD data will only be sent
when single tracking. (Default mode)
6.10. Request for OBD data by SMS
Send sms command “password” to gps device, below information will be returned:
863070010034246
15 digital IMEI No.
T: 05/21/13 15:25:50 Time
ODO:
Accumulative mileage
FLI:
remaining fuel
AF:
Average Fuel
Dtime:
Driving time
speed:
Speed
Pload:
Power load
TEMP:
Water temperature
ATP
Throttle percentage
RPM
Engine speed
BAT
battery voltage
DTC
diagnostic trouble code
For “Cumulative mileage, remaining fuel, average fuel consumption”, tracker will identify
intelligently and display it if vehicle protocol supports, otherwise, no “ODO, FLI” in the
message.
