www.electronline.cl
T: 02-23023149
14
Remark: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, while
the second latitude & longitude is the coordinate of the bottom right corner, it will alarm at
interval of 3 minutes.
Cancel: Send SMS “nospassword” to deactivate this function.
6.24.6.
Multi-area management
1. Set Area
Send SMS command "area+pspace+latitude,lospace+areaname,distanceM" to
tracker(distance unit: M for meter, K for kilometer), it will reply "area01
ok".
Example: Send "area123456 22.353648,113.543678 school,800M".
Note: 5 areas at most and the distance between two points can't be less than the total distance in
the 2 commands, and different areas can't cover each other.
2. Delete areas
Send SMS command:"pspace+area name", tracker will reply:"noarea ok".
3. Rename and set distance
Send SMS command "pspace+old name;new name,distanceM" to tracker, if
name is not repeated and area doesn't cover others, it will reply "rename ok!" for successful
configuration.
Example: Send"rename123456 area01;school,800M", it means the new area name is "school",
and covers area of a radius of 800 meters.
4. Activate multi-area management
Send SMS command "area+pspace+on" to tracker, it will reply "Area on ok!", when
tracker enter the pre set area, it will send SMS "area name+latitude & longitude" to all the
authorized phone number, and send same SMS when goes out of the area.
4. Deactivate Multi-area management
Send SMS command "area+pspace+off" to tracker, it will reply"area off ok!
6.24.7.
Movement alarm
Set up: when the unit stays immobile in a place for 3-10 minutes with
GPS signal reception , the user can send SMS “move+pspace+0200” to the tracker
(Suppose area of a radius of 200 meters, it supports 4 digits at most. Unit: Meter).
It will reply
“move OK”. In case of such a movement (the default distance is 200m), it will send SMS
“Move+ latitude & longitude” to the authorized numbers at interval of 3 minutes.
Cancel: Send SMS “password” to deactivate the movement alarm.
