Aut
oSense & Aut
oSense V
oice
22
22
MEASURING WITH THE METER
Before you start the test, check that everything you might need is ready:
meter, test strip, lancing device, some tissues. Now, put your meter on a
clean, flat surface. Wash your hands thoroughly.
1.
Switch
AutoSense
meter on either by
inserting a test strip into the strip holder or
by pressing the
OK
button. Upon insertion of
a test strip, a code number will appear on
the display. Compare the displayed code
with the code printed on the vial label. It is
also recommended to check the strips’
expiration date.
If the meter is switched on by pressing the
OK
button, on the lower right side of the
display, a strip icon will instruct you to insert
the test strip. Take a test strip, and holding it
by its arrowhead-shaped end, insert it firmly
D61-9201-2_ beliv.indd 22
D61-9201-2_ beliv.indd 22
2012.11.13. 15:32:14
2012.11.13. 15:32:14
