Electronika AutoSense Voice User Instructions Download Page 11

Page: 11 / 60

Aut
oSense & Aut

oSense V

oice

PRECAUTIONS

Always operate your

AutoSense

Blood Glucose Meter according to the

instructions provided hereafter. If the equipment is used in a manner
not recommended by this manual, the warranty provided by the
manufacturer may be voided.

It is essential to read and follow the information below:

•

AutoSense

is designed to be used

ONLY

with an

AutoSense Test

strip and no other strips.

• When inserting a new strip, always check if the code on the vial of

strips you are using matches the code that appears on the display.

If it does not,

DO NOT

use the strip to measure your blood glucose

value

(see

“Strip Autocoding”

• Your

AutoSense

meter is calibrated to be used only with fresh

capillary blood. Venous blood or plasma is not suitable for accurate

monitoring of glucose levels.

D61-9201-2_ beliv.indd 11

2012.11.13. 15:32:08

Summary of Contents for AutoSense Voice





























































Search results

Summary of Contents for AutoSense Voice

Reviews:

Related manuals for AutoSense Voice

Brands by name

Popular brands

Electronika AutoSense Voice, User Instructions

Search results

Summary of Contents for AutoSense Voice

Reviews:

Related manuals for AutoSense Voice

Brands by name

Popular brands