Electronics International MVP-50T, Installation Instructions Manual

Page: 3 / 95

Important Notice
***** MUST READ *****
Page 1 of 4
If you think it is not important to read this manual, you're wrong! This manual contains important
operating information that may affect the safety of the pilot, passengers, aircraft, operation of the system or
time to install the system. You MUST read the manual prior to installing this system. Any deviation from these
installation instructions is the sole responsibility of the installer and should be done in accordance with AC
43.13.
Read the Warranty/Agreement . There is information in the Warranty/Agreement that may alter your decision
to install this product. If you do not accept the terms of the Warranty/Agreement, do not install this
product . This product may be returned for a refund. Contact Electronics International Inc. for details.
If you are not an FAA Certified Aircraft Mechanic familiar with the issues of installing aircraft N1,
N2, ITT, Torque, Volt, Amp, Oil Temperature and Pressure instruments, Do Not attempt to install this
instrument. The installer should use current aircraft standards and practices to install this system (refer
to AC 43.13).
If the installer does not have the skills, knowledge, tools, equipment or facility, to perform and determine
whether the installation of this product is safe, reliable and accurate and to determine whether this product is
operating properly after installation, DO NOT INSTALL THIS PRODUCT . If the owner/pilot and/or installer
are unwilling to take the responsibility for the installation and operation of this product, DO NOT INSTALL
THIS PRODUCT. This product may be returned for a refund. Contact Electronics International Inc. for
details.
By installing this product, the aircraft owner/pilot and installer agree to hold Electronics International Inc.
harmless and in no way responsible for monetary compensation, including punitive damages for any incident,
harm and/or damage associated with this product. If you do not agree to the above, DO NOT INSTALL THIS
PRODUCT. This product may be returned for a refund. Contact Electronics International Inc. for details.
Electronics International Inc. is not liable or responsible for a pilot’s action or any situation that results in
personal injury, property damage, missed commitments, lack of use of an aircraft or any expenses incurred due
to: product failure, inaccuracy in displayed data or text files, display or display format issues, software bugs
or problems, upgrade or customization issues, misinterpretation of the display, warning and/or limit settings,
calibration problems, installation issues (leaks, mis-wiring, obstructions, damage to aircraft or components,
incorrect installation of any parts, wrong parts, parts that don’t fit, etc.) or any other issues related to the
installation or operation of this product. All of the above are solely the pilot’s and/or installer’s responsibility.
The pilot must understand the operation of this product before flying the aircraft. The pilot will not allow
anyone to operate the aircraft that does not know the operation of this product. The pilot will keep the
instrument Operating Instructions in the aircraft at all times . If you do not agree to all of the above, DO NOT
INSTALL THIS PRODUCT. This product may be returned for a refund. Contact Electronics International
Inc. for details.
iii