ELECTRONIC ASSEMBLY EA KIT129-6 Manual Download Page 1

Page: 1 / 20

ZEPPELINSTRASSE 19 · D- 82 205 GILCHING

PHONE +49-8105-778090 · FAX +49-8105-778099 · http://www.lcd-module.de

EA KIT129-6

6.2005

TECHNICAL DATA

LCD GRAPHIC DISPLAY WITH VARIOUS GRAPHIC FUNCTIONS AND BUILT IN FONTS

128x64 PIXELS WITH LED ILLUMINATION, BLUE NEGATIVE OR

BLACK AND WHITE WITH WHITE LED-BACKLIGHT

POWER SUPPLY 5V/170mA OR 9~35V OPTIONALLY

RS-232 WITH BAUDRATES 1,200..115,200 BD

5 FONTS BUILT IN, EVEN WITH 90° ROTATION FOR VERTICALLY USE

FONT ZOOM (double size to 8-times) UP TO 35mm CHARACTER SIZE

POSITIONING

ACCURATE TO THE PIXEL

WITH ALL FUNCTIONS

PROGRAMMING BY MEANS OF HIGH-LEVEL LANGUAGE-TYPE COMMANDS:

STRAIGHT LINE, POINT, AREA, AND/OR/EXOR, BAR GRAPH...

UP TO 256 MACROS PROGRAMMABLE

COMBINATION OF TEXT AND GRAPHICS ALL THE TIME

BUILT IN SOFTWARE SUPPORTS TOUCH PANEL

OPERATING TEMPERATURE RANGE -20..+70°C, STORAGE -30..+70°C

ACCESSORIES

WITH TOUCH PANEL 5x3 AREAS (ANTI-GLARE AND SCRATCH-PROOF)

FLOPPY DISK FOR MACRO PROGRAMMING (PC DOS/WIN)

EA DISK240

CABLE (1.5m) FOR CONNECTION TO 9-PIN SUB-D (RS-232 FEMALE)

EA KV24-9B

ORDERING INFORMATION

128x64 WITH TOUCH PANEL 5x3, LED-B./L. BLUE-WHITE

EA KIT129-6LWTP

128x64 DOTS WITHOUT TOUCH PANEL

EA KIT129-6LW

128X64 DOTS BLACK AND WHITE WITH TOUCH PANEL

EA KIT129J-6LWTP

SUPPLY VOLTAGE 9~35VDC INSTEAD OF 5V

EA OPT-9/35V

MOUNTING BEZEL, MADE OF BLACK ANODIZED ALUMINIUM

EA 0FP129-6SW

CONTROL PANEL WITH FONTS,

GRAPHICS COMMANDS AND MACROS

with and w

./o.

Touc

h P

anel

EA KIT129-6LWTP
Dimensions 75x60x24mm
Viewing area 61x 38 mm

EA KIT129J-6LWTP

Summary of Contents for EA KIT129-6





















Search results

Summary of Contents for EA KIT129-6

Reviews:

Related manuals for EA KIT129-6

Brands by name

Popular brands

ELECTRONIC ASSEMBLY EA KIT129-6, Manual

Search results

Summary of Contents for EA KIT129-6

Reviews:

Related manuals for EA KIT129-6

Brands by name

Popular brands