ELECTRONIC ASSEMBLY EA KIT129-6, Manual

Page: 9 / 20

9
EA KIT129-6
Bar graph commands
Define bar graph
ESC
B
R
L
O
U
no x1 y1 x2 y2 sv ev pat
Defines a bar graph to the left (L), right (R), top (O) or bottom (U)
with the number no (1..16). x1,y1,x2,y2 define the rectangle
enclosing the bar graph. sv,ev are the values for 0% and 100%.
pat=pattern (0..7)
Draw bar graph
no
value
Sets the bar graph with the number no (1..2) to the new user
'value'
Keyboard/touch panel commands
Define touch key with
horizontal label
ESC
T
H
f1 f2
Ret
code
For
Text
...
NUL
Groups touch fields f1 to f2 (diametrically opposite corner fields) together to
form a touch key with the return value ´Ret. code´ (=1..255) (Ret. code=0
means the touch key is inactive).
´Form´: Draws touch key (=0 nothing; =1 delete; =2 with frame)
´Text´: Positions a string on the touch key (centered) using the current font;
lines are separated by the character '|' ($7C, dec: 124); NUL character ($00)
= end of string
Define touch key with
vertical label (rotated
by 90°)
V
(P)reset touch keys
P Activates all touch keys in ascending order (fields with code 1..15)
R Deactivates all touch keys (all fields with code 0)
Touch key response
I n1
n1=0: Touch key is not inverted when touched
n1=1: Touch key is automatically inverted when touched
S n1
n1=0: No tone sounds when (touch) key is touched
n1=1: Tone sounds briefly when (touch) key is touched
Invert touch key
M
n1
The touch key assigned the return code n1 is inverted manually
Query key manually
W Sends the currently depressed (touch) key at the RS-232/RS-422 interface
Key query on/off
A n1
The keyboard query is n1=0:deactivated;
n1=1:activated, keystrokes are sent automatically;
n1=2:activated, keystrokes are not sent (query with ESC T W)
Control/definition commands
Automatic flashing
area
(cursor function)
ESC
Q
D x1 y1 x2 y2 Defines a flashing area from x1,y1 to x2,y2; activates the flashing function
Z n1 Sets the flashing time n1= 1..15 in 1/10s; 0=deactivates the flashing function
C n1
Automatically flashing area as cursor for terminal operation
n1=0: deactivates flashing function; n1=1: activates flashing function (inverse,
6/10s)
Select/deselect
ESC
K
S add Activates the kit with the address n1 (n1=255: all)
D add Deactivates the kit with the address n1 (n1=255: all)
A add Assigns a new address (add) (in the power-on macro, for example)
Wait (pause)
ESC
X n1 Wait n1 tenths of a second before the next command is executed
Buzzer on/off
ESC J n1 n1=0:tone off; n1=1:tone on; n1=2..255:for n1 1/10s long on
Send bytes
ESC
S num data ...
Sends num (1..255; 0=256) bytes at the RS-232/RS-422 interface;
data ... = num bytes (e.g. control of an external serial printer)
Reset display
ESC
D R Resets and re-initializes the display controller
Port commands
Define as In- or Ouput
ESC
Y
M n1
n1=0: I/O1..8 set to input (=default after power-on / reset)
n1=1..8: n1 I/O-lines will be set to output (beginning at I/O8 downwards)
Write output port
W n1 n2
n1=0: Sets all 8 output ports in accordance with n2 (=8-bit binary value)
n1=1..8: Resets (n2=0), sets (n2=1) or inverts (n2=2) output port n1
Read input port
R n1
n1=0: Reads in all 8 input ports as 8-bit binary value
n1=1..8: Reads in input port <n1> (1=high level=5V, 0=low level=0V)
Port scan on/off
A n1 Deactivates (n1=0) or activates (n1=1) automatic scanning of the input port
Input port inverse
I n1 Evaluates the input port (n1=0: normal; n1=1: inverted)
Switch backlight on/off
L n1
CFL/LED backlight n1=0: off; n1=1: on; n1=2: invert;
n1=3..255: backlight for n1/10 sec. switched on and then automat. turn off
Macro commands
Execute macro
ESC
M
N n1 Calls the (normal) macro with the number n1 (max. 7 levels)
Execute touch macro
T n1 Calls the touch macro with the number n1 (max. 7 levels)
Execute port macro
P n1 Calls the port macro with the number n1 (max. 7 levels)
Macros autom. cyclical
A n1 n2 n3 Processes macros n1..n2 automatically cyclically; n3=pause in 1/10s
Macros autom.
ping-pong
J n1 n2 n3 Processes macros n1..n2..n1 automatically (ping-pong); n3=pause in 1/10s
Display commands (which apply to the whole display)
Delete display
ESC
D
L Deletes the contents of the display (all pixels off)
Invert display I Inverts the contents of the display (inverts all pixels)
Fill display
S Fills the contents of the display (all pixels on)
Switch display off
A
Makes the contents of the display invisible, but they remain there and further
commands are possible
Switch display on E Makes the contents of the display visible again