Electron Plus ASA100, User Manual

Page: 20 / 34

ASA100 User Manual (using EPIC 21 software) - work in progress
20 / 34
Two drop down lists below enable the user to select the function associated with each
button (list shown below, with button A assigned to cycle frequency):
The cycle function (i.e. Cycle Frequency) will go up relevant function and 'roll-over' to the
minimum setting (e.g. 200Hz, 500Hz, 1KHz, 10Hz, 20Hz....), this function is useful if you are
perhaps testing electrolytic capacitors and only want to assign a single button to the finding
the best signature.
+1 / -1 test will increment or decrement the test number (equivalent to pressing the left/right
arrow under Test Controls.
GOOD/CAPTURE and BAD are equivalents to the same named buttons under Test
Controls.
FREEZE/THAW currently have no function in EPIC 20.012
Note
1Vpk means that the output voltage of the instrument has a peak
voltage of +/-1Vpk, this would be equivalent of 2Vpk-pk (peak to peak)
or 0.707Vrms.