Electromotive xdi, Installation Manual & Users Manual

Page: 9 / 36

XDI Manual Version 1.8 Page 9

2017 Electromotive, Inc.
2.1 Engine Configuration Settings
To select between various engine configurations, 8-dip switches must be adjusted. To access the
dipswitches, remove the four screws on the cover plate on the end of the XDI with the knobs. This is shown in
Figure 1 .
The switch positions for each engine configuration are listed in
Table 1 .
NOTE: The XDI is shipped from the factory with all the switches DOWN. This will cause the status light to
be solid red when the XDI is powered. The desired configuration must be set before the XDI will function.
NOTE: Be sure that the dipswitch “clicks” into place. This may require the use of a small screwdriver.
*NOTE: 12
cylinder
configurations
MUST be aligned
to the 8
th
tooth.
All other
configurations
must be aligned
to the 11
th
tooth.
Table 1
–
Engine
Configuration
Settings
SW1
SW2
SW8
SW3
SW4 SW5
SW6
SW7
The UP position The DOWN position
Figure 1
-
Picture of
XDI with
Cover Plate
Removed
Engine Configuration Tach SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
1 Cylinder 1 Cyl UP UP UP DOWN DOWN DOWN DOWN DOWN
2 cylinder 4 stroke 1 Cyl UP UP UP DOWN DOWN DOWN DOWN DOWN
2 Cylinder 2 Stroke 4 Cyl. DOWN DOWN UP DOWN DOWN DOWN DOWN DOWN
3 Cylinder 2 and 4 Stroke 6 Cyl. UP DOWN DOWN DOWN DOWN DOWN DOWN DOWN
4 Cylinder 2 Stroke 4 Cyl. DOWN DOWN UP DOWN UP DOWN DOWN UP
4 Cylinder 4 Stroke 4 Cyl. DOWN DOWN UP DOWN DOWN DOWN DOWN DOWN
4 Cylinder Dual Plug 4 Cyl. DOWN DOWN UP DOWN DOWN DOWN DOWN UP
4 Cylinder Odd-Fire 4 Cyl. DOWN DOWN UP DOWN UP DOWN DOWN UP
6 Cylinder Even-Fire 6 Cyl. UP DOWN DOWN DOWN DOWN DOWN DOWN DOWN
6 Cylinder Odd-Fire 6 Cyl. UP DOWN DOWN DOWN DOWN UP UP DOWN
6 Cylinder Dual Plug 6 Cyl. UP DOWN DOWN DOWN DOWN UP DOWN DOWN
8 Cylinder 8 Cyl. DOWN DOWN UP UP UP DOWN DOWN UP
8 Cylinder 4 Cyl. DOWN DOWN UP DOWN UP DOWN DOWN UP
12 Cylinder *SEE NOTE 12 Cyl. UP DOWN UP DOWN UP UP DOWN DOWN
12 Cylinder *SEE NOTE 6 Cyl. UP DOWN UP UP UP UP DOWN DOWN