background image

How to Use Accessories

Electrolux Customer HELPLINE 0800 222 825. (Toll Free South Africa Wide.)

When cleaning stairs, do not place the vacuum on the stairs or on the stairs above you. This vacuum is fitted
with a constantly rotating brush roll. When using the hose to clean stairs, care should be taken that the back
- not the front - of the vacuum is placed against the base of the stairs. This will prevent the vacuum from

leaning forward and causing possible damage to carpets or floors.

Handle must be in upright position.

Raise height adjustment to ‘high carpet’ before using accessories.

Replace hose end into hose retainer after using accessories.

Crevice Tool and Extension Wand

Use for baseboards and corners.
Grasp crevice tool and wand near ridges
and pull apart. Push crevice tool into wand

and place on end of hose.

Dusting Brush

Use for furniture, drapes and vents.
Place dusting brush on end of hose, wand
or crevice tool.

Turbo Brush for Furniture and Stairs.
Make sure vacuum is below you

pushed against bottom step.

Attach Turbo Brush to the end of wand

or hose.

Vacuum must be turned off before
removing debris from turbo brush.

5

Summary of Contents for Z3270 series













Reviews: