Electrolux Z3270 series Owner'S Manual Download Page 5

Page: 5 / 12

Easy Assembly

Read all instructions before using this vacuum cleaner.

Moving parts! Make sure power switch is in OFF (0) position before plugging in power cord.

Assemble the vacuum cleaner before using.

Electrolux Customer HELPLINE 0800 222 825. (Toll Free South Africa Wide.)

Slide handle onto

vacuum body.

Tighten two screws.

Push cord into

cord retainer.

Place hose over

hose hook.

Wrap cord.

Place crevice tool and

wand in front of hose.

Place dusting brush

behind handle.

Snap turbo brush

onto handle.

Get Ready to Vacuum

If vacuum is hard to push,

raise carpet setting.

Lift latch to remove dustcup.

Empty after each use.

Attach turbo brush to end of wand

or hose for furniture and stairs.

Adjust height for carpet

or bare floor.

Plug into outlet. Step on handle

release to lower handle into position.

Push power switch (1) on.

Summary of Contents for Z3270 series













Search results

Summary of Contents for Z3270 series

Reviews:

Related manuals for Z3270 series

Brands by name

Popular brands

Electrolux Z3270 series, Owner'S Manual

Search results

Summary of Contents for Z3270 series

Reviews:

Related manuals for Z3270 series

Brands by name

Popular brands