How to Maintain Your Vacuum Cleaner
Electrolux Customer HELPLINE 0800 222 825. (Toll Free South Africa Wide.)
Make sure vacuum cleaner is turned off and power cord is unplugged.
Maintain Brush Roll
Do not remove end caps. Remove hair and threads from brush roll periodically.
Care should be taken when vacuuming rugs to ensure that edges and fringes do not
stop the rotation of the brush roll and snap the drive belt.
Check belt. Replace if worn, cut or out of shape.
Avoid touching the motor shaft when checking brush roll or belt.
How to replace brush roll or belt ZE090
1) Use handle release to lower handle flat onto
floor (fig. 1).
2) Remove 2 screws from brush roll cover
(fig. 2).
3) Lift off brush roll cover (fig. 3).
4) Remove brush roll and belt. Thread new belt
around motor shaft and brush roll (fig. 4).
5) Insert left end of brush roll first. Make sure
end cap fits into base (fig. 5). Pull right side
of brush roll to stretch belt and insert right
end cap into base. Make sure it slides into
position.
6) Rotate brush roll 2 turns to centre belt.
7) Replace brush roll cover (fig.3).
8) Replace 2 screws (fig. 6).
Fig. 2
Fig. 4
Fig. 5
Fig. 6
Fig. 1
Fig. 3
6
Summary of Contents for Z3270 series
Page 1: ......
