background image

IMPORTANT USER INFORMATION

IT  IS  MOST  IMPORTANT  THAT  THIS  INSTRUCTION  BOOK  SHOULD  BE  RETAINED  WITH  THE  APPLIANCE  FOR 

FUTURE  REFERENCE.  SHOULD  THE  APPLIANCE  BE  SOLD  OR  TRANSFERRED  TO  ANOTHER  OWNER,  OR 

SHOULD  YOU  MOVE  HOUSE  AND  LEAVE  THE  APPLIANCE,  ALWAYS  ENSURE  THAT  THE  BOOK  IS  SUPPLIED 

WITH  THE  APPLIANCE  IN  ORDER  THAT  THE  NEW  OWNER  CAN  BE  ACQUAINTED  WITH  THE  FUNCTIONING 

OF  THE  APPLIANCE  AND  THE  RELEVANT  WARNINGS.

THESE  WARNINGS  ARE  PROVIDED  IN  THE  INTEREST  OF  SAFETY.  YOU  MUST  READ  THEM  CAREFULLY 

BEFORE  INSTALLING  OR  USING  THE  APPLIANCE.

  This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

  It is dangerous to alter the specifications or modify the product in any way.

•  Always store your vacuum cleaner in a dry place away from damp atmosphere and do not use it to pick up water or other liquids.

  Do not use the appliance in the presence of flammable gasses.

  Never allow anyone to have access to the rotating brush of the appliance (if fitted) unless the appliance is disconnected from the mains supply.

  Never leave the appliance running unattended.

  Remove the plug from the wall socket before attempting any form of user maintenance specified in the user instruction booklet.

  Do not carry or drag your vacuum cleaner by the mains supply cable.

  Do not tug at the mains supply cable to remove the plug from the wall socket.

  Ensure the mains supply cable is kept well away from the rotating brushes (where fitted) of your appliance whilst in operation.

  Keep the mains supply cable away from heat, oil, sharp edges and rough surfaces. Always ensure that the cable is not damaged in any way.

  Never pick up hot cinders or lighted cigarette ends.

  Extreme care is required when cleaning stair carpets with your appliance. Ensure that your cleaner is in a stable position at the bottom of 

the stairs, and take care not to stretch the hose beyond its actual length. Always ensure when using your cleaner on the stair treads that 
you keep one hand firmly on the appliance.

  Dust bags and filters (depending on model) should be changed at regular intervals as stated in your instruction booklet.

  Always use genuine Electrolux dust bags and filters.

  Do not place the air freshener loose inside the dust bag compartment or cyclonic dust cup.

  Do not use the appliance without a dust bag or with the dust cover removed or dust cup.

  When fitting and changing the accessories always follow the instructions in the instruction booklet.

  Under no circumstances should you attempt to repair the appliance yourself. Repairs undertaken by unauthorised or inexperienced persons  

may cause injury and/or serious malfunctioning.

  This appliance should be serviced by authorised Electrolux personnel and only genuine Electrolux spare parts should be used.

  The supply cable fitted to your machine is of two core construction. Where a moulded-on plug is not fitted the leads at the end of the 

cable are not prepared for a specific type of plug.

As a general guide to fitting any plug
• 

Ensure the lengths of wire inside the plug are prepared correctly.

  Connections should be firmly made after all conductor strands are entered into the terminal posts.

  When preparing the cable ends take care not to damage the outer sheath, or the insulation surrounding the inner conductors.

  Tighten all screws.

  Replace the top cover of the plug and secure.

Extension Cable
• If using an extension cable at any time always ensure that the insulation sheath is in good condition and is not damaged in any way.
• Make sure that the socket is fitted to the extension cable correctly, if in doubt have it checked by a Qualified electrician.
Double Insulation

•  Your vacuum cleaner is double insulated. This means that all external parts are electrically insulated from the mains. This is 

done by placing insulation barriers between the electrical and mechanical components, making it unnecessary for the cleaner 
to be earthed.

2

The symbol          on the product or on its packaging indicates that this product may not be treated as household waste. 

Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By 

ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and 

human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed informa-

tion about recycling of this product, please contact your local city office, your household waste disposal service or the shop 

where you purchased the product.

Summary of Contents for Z1300 Series





















Reviews: