TSE-P 01.01 EB
13/56
599 34 55-61
“ELECTRONIC DRYING” button (WASHER-DRYERS, certain models only)
It is possible to select two different electronic levels of dryness: one for COTTON and one for SYNTHETICS
cycles:
Þ
Extra dry (only cotton)
Þ
Store dry (cotton and synthetics)
Þ
Iron dry (only cotton)
The drying time is automatically calculated by the "Fuzzy" logic.
The drying phase can be performed either as automatic drying phase (non stop programme), if previously
selected together with the washing programme, as well as a separate drying phase.
“DRYING TIME” button (WASHER-DRYERS)
When this button is pressed it is possible to select (5 minutes a time) from 10 to 130 minutes drying for
COTTON cycles and from 10 to 100 minutes for SYNTHETICS cycles.
The drying cycle can be selected both as automatic drying and as separate drying cycle.
“START/PAUSE” button
Start
: After entering the parameters for the cycle, press this button to start the
wash programme; the corresponding pilot light stops flashing. If the
DELAYED START button has been pressed, the delayed start
countdown is shown up in the display.
Pause:
When the button is pressed again, the current programme is interrupted
and the display, or relative LED, flashes. When the appliance is in
“pause” mode the door can be opened provided that:
- the appliance is not in the heating or drying phase
- the water level is not high
- there is no movement of the drum
When in “pause” mode, some of the programme parameters can be modified:
- all cycle options can be modified prior to the phase in which they are performed
- the spin speed can be modified before the final spin
- drying selections can be modified before the starting of the drying phase.
To re-start the cycle, press the START/PAUSE button.
Water drain and spin cycle:
after the "rinse hold" phase press this button to start the cycle with the drain
and final spin again.
