35
Demount the control knob unit from the program unit by unscrewing the screw a bit (4–5 mm)
until the control knob unit loosens.
fig.7640
33
Mount the new program unit
Start by mounting the control knob unit on the program unit. Fasten the screw.
Mount the program unit with the CPU part. Mount the program unit on the control panel and make
sure that the guide pins are in position. Fasten the screws to the panel.
A
fig.7511
34
Connect the cables and remount the cover to the CPU.
Mount the cover ring and the control knob
Mount the cover ring and rotate it clockwise until it is in position.
Summary of Contents for W555H
Page 2: ......
