Electrolux TE1120HP, User Manual

Page: 29 / 76

•
Connect the mains plug to the mains socket only at the
end of the installation process. Make sure that the
mains plug is accessible after installation.
•
Ensure good air ventilation in the room where the
appliance is installed to avoid the backflow of unwanted
gases into the room from appliances burning gas or
other fuels, including open fires.
•
Exhaust air must not be discharged into a flue which is
used for exhausting fumes from any appliances burning
gas or other fuels.
•
WARNING: Keep ventilation openings clear of
obstruction in the appliance enclosure or in the built-in
structure.
•
The ventilation opening in the base must not be covered
by a carpet, mat, or any floor covering.
1.3 Electrical connection
WARNING!
Risk of fire and electric shock.
•
The appliance must be correctly earthed. The
manufacturer is not responsible for the consequences
of an inadequate earthing system.
•
Make sure that the parameters on the rating plate are
compatible with the electrical ratings of the mains power
supply.
•
WARNING: The appliance must not be supplied through
an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and
off by a utility.
•
Always use a correctly installed shockproof socket.
•
Do not use multi-plug adapters and extension cables.
•
Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
•
Do not touch the mains cable or the mains plug with
wet hands.
•
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service
ENGLISH 29