9.
HINTS AND TIPS
9.1
Ecological hints
• Spin the laundry well before drying.
• Do not exceed the load sizes which are
specified in the programs chapter.
• Clean the filter after each drying cycle.
• Do not use fabric softener to wash and
then dry. In the tumble dryer laundry
becomes soft automatically.
• Use distilled water like that used for
steam ironing. If it is necessary, clean
the distilled water before (e.g. with a
coffee filter) to remove any particles.
• Always keep the airflow slots at the
bottom of the appliance clear.
• Make sure there is good airflow where
the appliance is to be installed.
9.2
Adjustment of the remaining
laundry moisture degree
To change the default degree of the
remaining moisture of the laundry:
1.
Turn on the appliance.
2.
Wait approximately 8 seconds.
3.
Select 1 of available programmes.
4.
Push at the same time and hold down
the
Half load
and
Cupboard
dry
buttons.
One of the symbols goes into the view on
the display:
- the maximum dry laundry
- the more dry laundry
- the standard dry laundry
5.
Push the
Start/Pause button
again and again until you set
necessary degree.
6.
To memorise the setting, push at the
same time the
Half load
and
Cupboard dry
buttons for
approximately 2 seconds.
9.3
Deactivating the Reservoir
indicator
The water container indicator is by default
on. It starts to light at the end of the drying
cycle or during the cycle if the water
reservoir is full. If the draining kit is installed
the water container is drained
automatically and indicator can be
permanently off.
To deactivate the indicator:
1.
Turn on the appliance.
2.
Wait approximately 8 seconds.
3.
Select 1 of available programmes.
4.
Push at the same time and hold down
the
Half load
and
Iron dry
buttons.
One of 2 configurations is possible:
• the Reservoir indicator:
is on
and the symbol
goes into
the view - the water container
indicator is permanently
on
• the Reservoir indicator:
is off
and the symbol
goes into
the view - the water container
indicator is permanently
off
10.
CARE AND CLEANING
10.1
Cleaning the filter
At the end of each cycle the
Filter
symbol comes on the display and you
must clean the filter.
The filter collects the lint
during the drying cycle.
To achieve the best drying
performances clean the filter
regularly , clogged filter lead
to longer cycles and energy
consumption increase.
Use your hand to clean the
filter , and if necessary , a
vacuum cleaner .
www.electrolux.com
40
Summary of Contents for TE1120HP
Page 74: ...www electrolux com 74 ...
Page 75: ...DEUTSCH 75 ...
