Electrolux TE1120HP, User Manual

Page: 42 / 76

10.3 Cleaning the condenser
If the symbol Condenser flashes on the
display, inspect the condenser and its
compartment. If it is dirty, clean it.
WARNING!
Do not touch the metal
surface with bare hands. Risk
of injury. Wear protective
gloves. Clean carefully to
avoid damaging the metal
surface.
To inspect:
1. Open the door. Pull the filter up.
2. Slide the release button on the bottom
of the door to open the condenser
door.
3. Turn the lever to unlock the condenser
cover.
4. Lower the condenser cover.
5. If necessary, remove the fluff from the
heat exchanger and its compartment.
You can use a wet cloth and/or a
vacuum cleaner with a brush
attachment.
6. Close the heat exchanger cover.
7. Turn the lever until it clicks into
position.
8. Put the filter back.
www.electrolux.com 42