15
www.electrolux.com
1. Press the two latches and slide the lid forward
to remove the brush roll lid.
Maintenance
Cleaning the Brush roll
2. Pull out the Brush roll and clean the brush and
bearings.
Remove entangled threads by snipping
them away with scissors. Refit in reverse order.
Brush roll can be replaced. (Ref:
ERK2
)
Cleaning the Air channel
Changing the batteries
Remove the dust container.
Remove clogged
debris in the air channel. Put the dust container into
place.
1. The battery compartments are located on
the bottom side of the robot.
Use a screwdriver
(PH2) to unscrew the battery compartment lids.
Replace the battery packs and refit the battery
compartment lids.
Caution!
Make sure to change the two battery
packs at the same time.
Cleaning the Air channel, Changing the batteries
