Electrolux NEXT GEN, Service Manual

Page: 85 / 88

85
2. Remove the side heat shield by removing four screws
holding the shield to the frame and side panel. Turn
the front leveling leg almost out and slide the shield
back and out.
3. Reach behind the frame and release the glide.
Side heat shield screws
Removing the bottom heat shield:
1. Remove the three screws holding the heat shield to
the bottom wool shield, and allow the shield to drop
down.
Bottom heat shield screws
Removing bottom wool shield:
1. Remove the heat shield.
2. Remove the four screws, two in the front and two in
the back, holding the shield to the frame.
Bottom wool shield screws
Removing the warmer drawer:
1. Pull the drawer out to the stop.
2. There is a latch on each of the drawer glides. Lift the
latch on the right side. Then push down on the latch
on the left side and pull the drawer the rest of the way
out.
Right side latch
Removing the warmer drawer side rail:
1. The side rail snaps to the side of the drawer. To
remove the rail, lift up on the rail.
Side rail