Electrolux NEXT GEN, Service Manual

Page: 78 / 88

78
Trim screws
Door handle:
1. Remove upper door trim.
2. Remove the two screws holding the door handle to
the upper door trim.
Handle screws
Outer door glass and trim:
1. Remove upper door trim.
2. Remove the four screws at the bottom holding trim
to the inner door liner, and lift the glass and trim off.
Bottom screws
Center glass:
1. Remove the outer door glass and trim.
2. Remove the eight screws, four from each,
holding the top and bottom center glass trims.
3. Remove the trims and lift the glass off.
Eight trim screws
Wool shield:
1. Remove the center glass.
2. Remove the six screws, two at the bottom and two
on each side, holding the wool shield to the inner
liner and slide the wool shield up and off.
Six wool shield screws
Glass package and inner door liner:
1. Remove the wool shield. The glass package can
now be lifted out.
2. With the glass package removed, the door seal,
insulation and the inner door remain.
Glass package and insulation
Components inside the oven
NOTE: One side of both the bake and broil elements is
connected to Line 2. Never try to remove either the bake
or broil element without disconnecting power.
Bake element:
1. Disconnect power from the range.
2. Remove the two screws holding the bake element
to the oven liner.