Electrolux LU7, Owner'S Manual, Page: 7 / 16

9
ENGLISH
CALL THE SERVICE CENTRE
CALL THE SERVICE CENTRE
- The appliance continues to operate, but appropri-
ate checks by a technician are recommended.
B4 DETERGENT/RINSE-AID DISPENSERS AND
SETTINGS
If the appliance is connected to a water softener or
osmotic device, contact the detergent supplier for a
specific product.
Peristaltic dispensers (rinse-aid and detergent) require
periodic maintenance. The internal hose of the rinse-
aid dispenser should undergo periodic maintenance
(at least once or twice a year).
1. Dishwasher with incorporated detergent dis-
penser pump (Fig. 12).
Pump “R” dispenses about 0.9 g/s of detergent. When
the appliance is filled with water for the first time in the
day, it dispenses about 86 g of detergent in 90 sec.,
thereby providing a concentration of 2 g/l. Pump “R”
dispenses about 8 g in 8 sec. at each cycle.
Dispenser operating time may be changed, following
the instructions given in the next paragraph.
Insert the hose provided in the kit into the detergent
container.
2. Dishwashers with incorporated peristaltic
rinse-aid dispenser pump (Fig. 12).
Pump “S” dispenses about 0.1 g/s of rinse-aid. It dis-
penses 0.4 g in 4 sec. at each rinse.
Dispenser operating time may be changed, following
the instructions given in the next paragraph.
Insert the hose provided in the kit into the rinse-aid
container.
3. Dishwashers with incorporated rinse-aid dia-
phragm dispenser pump (Fig. 12).
Pump “T” is installed in appliances with pressure
boiler.
Dispensed amounts may be changed according to the
instructions given in the paragraph below.
Insert the supplied hose into the rinse-aid container.
Connections for automatic detergent dispenser
(Fig. 12)
Fig. 12
There are two holes (plugged) “O” (Ø 5 mm) for intro-
ducing the detergent.
These holes may be easily identified from outside by
looking for the countersunk marks on the external
panel.
Inside the tank there is a hole “P” (Ø 10 mm) closed
with a plug, which may be used for mounting a liquid
detergent injector.
Electrical connections for automatic detergent and
rinse-aid dispensers
Terminals are available on the power supply terminal
board for the electrical connection of external dispens-
ers working at 220…240 V. Max. power 30 VA.
Fig. 13
• Connect the detergent dispenser between termi-
nals 7 and 9. These connection points are live for a
set time during filling of the tank and at the start of
the wash cycle (see paragraph “Setting the dis-
pensers”).
C1..C8
E1..E8
S
R
O
P
T
D
O
L1
L2
L3