Accessories
Clean all accessories after each use and let them dry. Use a soft
cloth with warm water and a cleaning agent. Do not clean the acces‐
sories in a dishwasher.
Do not clean the non-stick accessories using aggressive agents,
sharp-edged objects or in a dishwasher.
11.2 Stainless steel or
aluminium ovens
Clean the oven door with a damp cloth or
sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel
with the same precautions.
11.3 How to remove: shelf
supports
To clean the oven, remove the shelf
supports.
CAUTION!
Be careful when you remove
the shelf supports.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
Install the removed accessories in the
opposite sequence.
11.4 How to use: catalytic
cleaning
The cavity is coated with a catalytic
enamel. It absorbs fat.
Before you turn on the cleaning:
• remove all the accessories and
removable shelf supports.
• clean the oven floor with warm water
and mild detergent.
• clean the inner door glass with warm
water and soft cloth.
1. Turn on the oven.
2. Press again and again until the
display shows: "Cata". The cleaning
takes 1 hour.
You cannot change the duration of the
cleaning. You can delay the start of the
cleaning with the function: END.
The signal sounds at the end of cleaning.
The oven turns off.
3. Press any sensor field to stop the
signal.
4. When the oven cools down, clean the
cavity with a wet soft cloth.
Spots or discolouration of the catalytic
coating have no effect on Catalytic
cleaning.
11.5 Removing and installing
the door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
The door is heavy.
1. Open the door fully.
2. Fully lift up the clamping levers (A)
on the two door hinges.
ENGLISH
25
Summary of Contents for KDFCC00K
Page 31: ...ENGLISH 31 ...